Solar street lights have split, there are integrated, in comparison, split solar street lights and integrated solar street lights in the beauty, efficiency, safety of these three aspects have their own characteristics, there is no absolute advantages and disadvantages, according to the use of the occasion to choose.
Solar street lights have split, there are integrated, in comparison, split solar street lights and integrated solar street lights in the beauty, efficiency, safety of these three aspects have their own characteristics, there is no absolute advantages and disadvantages, according to the use of the occasion to choose.
Different components: The split solar street light iscomposed of a battery, an LED lamp holder, a photovoltaic panel, a controller and a lamp pole, and must be equipped with a lamp pole. The battery must be buried underground and connected through wires inside the lamp pole.
Different prices: Due to design reasons, the panel power and battery capacity of integrated solar street lights are generally smaller than those of split types, and the cost is lower. Therefore, under the same specifications, integrated solar street lights are much cheaper than split types.
Installation complexity varies: The installation of integrated solar street lights is more convenient, and it can be installed by twisting the screw, while the split solar street lights require assembly, wiring, installation of battery brackets, lamp holders, and battery pits, which are relatively complex.
Technical parameters Different: Split solar street light technical parameters range from 10-80W, or even higher; Integrated solar street lights generally come in four types: 10w, 20w, 30w, and 40w.
Different application range: Split solar street lights have a wider application range, which can be used for large roads and highways with higher lamp requirements, and can also be used for squares, residential areas, industrial parks, etc. Integrated solar street lights are more used in urban roads, streets, communities, factories and rural roads.
Different maintenance methods: Lamps are difficult to solve the fault, split solar street lamp manufacturers need to send technicians to the local maintenance, battery, photovoltaic panels, LED lamp heads, wires, etc., one by one to solve the fault; Integrated solar street lights only need to remove the whole lamp and send it directly back to the factory for maintenance.
In general, the integrated and split solar street lights have their own characteristics, there is no absolute advantages and disadvantages, we can choose according to the actual use requirements.
