Gas stations are common transportation facilities. In order to ensure the safety of refueling at night, lighting fixtures are usually installed on the ceiling. Reasonable installation schemes of lighting fixtures can effectively improve the lighting effect and energy utilization rate of gas stations, and also save costs and maintenance expenses. UNIKE will introduce you to an installation scheme suitable for gas station lighting fixtures.
1.Gas station lamp selection
When choosing gas station lamps, you need to consider the following factors: lighting effect, energy consumption, life and maintenance cost. Generally speaking, gas station lamps should choose high-brightness, high-efficiency LED lamps. LED lamps have the advantages of energy saving, long life, earthquake resistance and impact resistance, which can meet the lighting needs of gas stations. In addition, it is also necessary to select the appropriate lamp power and quantity according to the specific situation of the gas station to achieve the best lighting effect.
2.Lamp installation location
The installation location of gas station lamps should be as close as possible to the gas pump and refueling area to ensure the lighting effect during refueling. Generally speaking, lamps should be evenly distributed along the ceiling of the gas station to ensure a balanced lighting effect throughout the gas station. At the same time, the installation height of the lamps must also be considered. It is generally recommended to install the lamps 2-3 meters above the eaves to ensure that the lighting range covers the refueling area.
3.Lighting installation methods
There are many ways to install gas station lighting, the most common of which are the hanging rod type and embedded type. The hanging rod type installation is to fix the lighting fixture on the board through the hanging rod. It is simple and convenient to install, and is conducive to the heat dissipation and maintenance of the lighting fixture. The embedded installation is to embed the lighting fixture into the ceiling. It is necessary to drill holes in the ceiling to fix the lighting fixture. The appearance is relatively simple.
4.Lighting power wiring
The wiring of gas station lighting should comply with safety regulations to ensure stable current and prevent leakage. Generally speaking, the power wiring of lighting should be hidden in a special wire trough or wire tube to prevent external damage or electric shock accidents. In addition, the wiring of the lighting should be checked regularly for looseness or aging, and repaired or replaced in time.
5.Lamp maintenance
The maintenance of gas station lamps is essential to ensure the lighting effect. Clean the dust and dirt on the surface of the lamp regularly to ensure the transparency and brightness of the light. At the same time, the heat dissipation of the lamp should be checked regularly to avoid overheating and damage of the lamp due to long-term use. If the lamp is found to be faulty or damaged, it should be replaced or repaired in time to avoid affecting the normal operation of the gas station.
The installation plan of gas station lamps should comprehensively consider factors such as selection, installation location, installation method, power wiring and maintenance. A reasonable installation plan can improve the lighting effect and energy utilization rate of the gas station, and also save costs and maintenance expenses. The installation of gas station panel lamps is not only to ensure the safety of refueling, but also to enhance the image and service quality of the gas station. I hope the content of this article is helpful to you.
